Skip to content

TQ Introduces Over-the-Air Updates for Its Ebike Drives and Upgrades the App

TQ introduces over-the-air updates for its HPR40, HRP50 and HPR60 ebike systems

Bosch, Avinox, Specialized, Mahle, Shimano, Qore, Bafang, Aventon, Lemmo, Maxon – the list could easily go on. All these drive manufacturers are implementing new software and firmware for their ebike systems directly via their own apps. A prominent name is now catching up with the competition. TQ is also switching to over-the-air updates, or OTA for short.

Install new software for TQ ebikes wirelessly via the app

A few weeks ago, TQ announced that it would be relying on wireless data transmission for rolling out software updates in future. In a video published on the company’s own Youtube channel, Boris Diener, Digital Product Manager at TQ-Systems, explained that they would be enabling new features to be delivered to ebike systems via the TQ E-Bike App. This is, without exception, good news for you. After all, it means you’ll be able to access changes such as improved motor performance or new smart features more quickly in future.

TQ introduces over-the-air updates for its HPR40, HRP50 and HPR60 ebike systems
By switching to over-the-air software updates, TQ is adopting a method of data transfer now used by the majority of drive manufacturers in the ebike industry.

TQ plans to roll out the switch to OTA for all three current e-drives: the TQ HPR40, TQ HPR50 and TQ HPR60. This means that future software updates for the motor and the system can be conveniently installed from home. Until now, you’ve always had to take your ebike to a dealer to do this. This will still be possible. TQ is leaving the decision up to ebike riders.

Over-the-air updates introduced in stages

To avoid overburdening its own dealer network, the manufacturer is phasing in the introduction. It is rolling out the feature to you in three stages – one stage at a time for each of the three ebike systems. Otherwise, it seems the rush at the shops would be too great, or the computer system would be overwhelmed. For the HPR40, the roll-out already began on 18 September 2026. TQ has now followed suit with the HPR60 as well. If everything continues to run smoothly, the switch for the HPR50 could then complete the process at the turn of the year.

Before the wireless era begins for those with a TQ ebike, an initial final update will be required in person at the bike shop. So, you’ll need to pop in there at least once. TQ recommends booking an appointment in advance rather than just turning up on the off chance.

More information on the ebike system in the app in future

Once the new firmware and software have been installed on your ebike and you’ve also installed the latest version of the TQ app on your smartphone, you’ll find a few new features in the app. To see them, switch from the dashboard to the ‘My Bike’ menu. From there, select ‘Bike information’ to access a new section labelled ‘Software status’. Clicking on this will finally open a page where you can check the firmware version of the motor, the display, the battery, any range extender you may have, and the Smartbox. A button will also appear there, allowing you to check for any available updates.

“Dashboard” screen in the TQ ebike app
From the app’s dashboard, you can navigate to ...
‘Bike information’ screen in the TQ ebike app
... to the “Bike information” menu. From here, it’s just one click away ...
‘My bike’ screen in the TQ eBike app
... to the ‘My Bike’ screen. That’s where you’ll find the link ...
‘Software status’ screen in the TQ eBike app
... to the overview of firmware versions for all ebike components on the new ‘Software status’ screen.

According to TQ, the company hopes that the switch to over-the-air updates will enable it to roll out new features more quickly in future. At the same time, your experience with a TQ ebike should improve, as you’ll save yourself a trip to the bike shop and can carry out a process such as a software update – which usually only takes a few minutes – from the comfort of your own home.

Notification in the TQ ebike App regarding an available firmware update
Notifications regarding available firmware updates will soon not only appear as pop-up windows in the TQ ebike App, but will also include the option to install them yourself.

The introduction of the OTA feature follows on from the latest software updates for the HPR40 and HPR60 released in September 2026. With these, the manufacturer introduced important enhancements to the system. Work is currently apparently underway at the headquarters in Seefeld on a software update for the HPR50.

Pictures: TQ-Systems GmbH

Leave a Reply

Your email address will not be published. Required fields are marked *