The Busch and Müller Toplight Flat S e-bike taillight is especially suitable for electric bikes and thanks to LineTec offers a lot of visibility in the dark.
Equipped with LineTec technology from Busch and Müller, this rear light with its patented lens system provides best visibility. The beam angle of the Toplight Flat S taillight for ebikes is 320° and the integrated reflector conforms to the specifications of the German STVZO and also carries the "Z"mark of conformity. This means that the B&M Toplight Flat S ebike taillight is approved for German road traffic in the range of ebikes up to 25km/h.
Because the taillight does not have a separate E-mark, this model is not suitable for fast ebikes (over 25km/h).
Special S-Pedelec tail lights with "E" mark:
- Busch & Müller Toplight Flat S-pedelec tail light with "E" test mark.
The special version of the Busch and Müller Toplight Flat S for electric bikes has no integrated capacitor and is designed for DC sources. The lighting is switched on and off via a light switch available on most e-bikes.
Optionally, the rear light can be routed so that the rear light can be switched on and off by the switch of the headlight. The non-existent capacitor extends the life of the electronics, in addition, you turn off the rear light automatically with, as soon as you turn off your e-bike.
The B&M Toplight Flat S electric bike is available with bolt spacing 50 and 80 mm and can be attached to luggage carriers with rear light mount. Reliably provides the Busch and Müller e-bike taillight for safety on the electric bike.
Die technischen Details des Elektrofahrrad Rücklichtes:
These articles could also be interesting for you:
The technical details of the B&M Toplight Flat S e-bike taillight:
|Power source:||eBike battery|
|Item:||Busch & Müller Toplight Flat S taillight for ebikes<br>approved, with Z mark of conformity|
|Scope of delivery:||LED taillight for ebike|
|Manufacturer:||Bush & Miller|
|Measurements:||117 x 50 x 40 mm|
|Item number:||329/5AS0211 (50 mm), 329/8AS0211 (80 mm)|
|Voltage input:||6 - 10V DC voltage|
|Screw distance:||50 and 80 mm available|