€7.50
Home delivery (Germany) 07/10/2026 - 09/10/2026
With the Bosch 1-arm bracket you mount the Kiox 300 display/ Kiox 500 / SmartphoneGrip on your handlebar. For maximum compatibility, the holder is available with the usual clamp diameters of 31.8mm and 35.0mm. You can also decide how you want to position your e-bike display. You can mount the single-arm holder facing forwards, upwards or backwards. In this way, you can position your display according to your wishes. Just take note of the matching cable outlet of the Bosch display mount for Kiox 300/Kiox 500 /SmartphoneGrip.
Features of the Bosch 1-arm mount for Kiox 300/Kiox 500/ SmartphoneGrip:
- 1-arm mount for Kiox 300/ Kiox 500 / SmartphoneGrip.
- handlebar diameter 31.8 mm and 35 mm
- allows individual positioning
- only for Bosch Smart System drive
- original Bosch eBikes System accessory
Note: The 1-arm holder is not compatible with the old Kiox display. When positioning, please also ensure that the cables are routed correctly from the display mount. For mounting in front of the handlebars, you need the cable outlet at the rear. For mounting the display above or behind the handlebar, you need the cable outlet at the front. If you are unsure, our customer service will be happy to help you.
| Bosch E-Bike System: | Bosch Smart System |
|---|---|
| Bosch System: | Bosch Active Line Plus from 2024 Smart System, Bosch Active Line from 2024 Smart System, Bosch Cargo Line 2022 - 2025 Smart System, Bosch Performance Line 2023 - 2025 Smart System, Bosch Performance Line CX 2022 - 2025 Smart System, Bosch Performance Line CX Race from 2023 Smart System, Bosch Performance Line SX from 2024 Smart System, Bosch Performance Line Speed 2023 - 2025 Smart System |
| Colour: | black |
| Compatibility: | only for the Bosch Kiox 300/500/Smartphone Grip Smart System Display |
| Drive system: | Bosch drive |
| Handlebar clamp: | 31.8mm | 35mm |
| Manufacturer: | Bosch |
| Mounting: | for handlebar mounting |
| Scope of delivery: | Clamp, adapter shell, spacer rubber, 2x screw M4x12 (adapter shell and clamp fastening), 2x screw M3x9.5 (display mounting), operating and installation manual |
Login
1 review
24 September 2026 11:12
Passt sehr gut, stabil, etwas zu breit
Teil funktioniert sehr gut und macht, was es soll. Da ich noch einen Halter für eine Lenkertasche montieren wollte, habe ich nun Probleme. Der Lenker wird nach außen dünner, aber es werden keine Adapter für dünnere Durchmesser beim KIOX-Halter mitgeliefert - also kann ich mit dem KIOX nicht weiter nach außen gehen. Um den Halter zwischen Vorbau und Lenkertaschenhalter montieren zu können, ist er aber zu breit. Ich habe den Halter nun abgeschiffen, damit er dazwischen passt. Glücklicherweise ist der Preis echt günstig, so dass man auch mal etwas probieren kann...
Customers also viewed
Customers also bought
