EL BURRO rear rack with suspension for mountain bikes

With the ElBurro Rack you equip your full-suspension mountain bike or E-MTB with a rack. The patented design allows mounting on almost any e-bike or bike. The special thing about it: the ElBurro rear rack is just as mobile as your mountain bike and adapts to unevenness of the track. Perfect for a quick trip to the trail after work. Once mounted, the mounting & dismounting is also done in a few simple steps. So you can simply unscrew your ElBurro Rack on non-working days and chase as usual through the forest.

Features of the ElBurro mountain bike rack

• Rear rack for full-suspension (E-)MTBs.
• Compatible with almost all MTB rear frames
• Patented & movable design
• handmade in Spain
• up to 25Kg payload

ElBurro Rack carrier - compatibility & designs

The mountain bike rack from ElBurro is compatible with almost any e-bike or bike - whether 26", 27.5" or 29" wheels. It is also mounted equally on quick release and thru axles up to a length of 180mm. For this, the ElBurro Rack carrier is available in different versions. Which variant you need depends individually on your rear wheel axle type.

ElBurro Rack axle mount variants

• QR / quick release - for axles with quick release
• no socket - for thru axles without recess in the frame
• flat socket - for thru axles with flat recess in the frame (Ø20mm)
• conical socket - for thru axles with a flat recess in the frame (Ø20mm)

For the thru-axle sockets, there are also different versions for the threaded side of the axles. Here, it is also important to use the correct thread pitch.

Thread variants for ElBurro thru axle mountings

• 12x1,0 - 12mm thru axle with 1,0 thread pitch
• 12x1,25 - 12mm thru axle with 1,25 thread pitch
• 12x1,5 - 12mm thru axle with 1,5 thread pitch
• 12x1,75 - 12mm thru axle with 1,75 thread pitch

If you have any uncertainties or special measurements on your bike, please feel free to contact our customer service.

Rack for MTB Fullys from Spain

The ElBurro Rack is made with passion and expertise in Spain. The rack is handmade here at ElBurro Biking, a small family business. The ElBurro full suspension rack was also the first of its kind in the world. Until today, the rack is constantly being developed further and is for us the number one solution for full suspension bikes.

Mounting the ElBurro rack for fullys with thru axle

For mounting on your mountain bike or e-bike, first attach the adapter plates to the ElBurro Rack. The matching screws and nut are already included. Now remove the thru axle on the rear wheel and replace it with the matching rack mounts. Now you can put on your ElBurro Rack and fix it with the quick release axle. Now align the rack horizontally and attach it to the seat post with the appropriate clamp. To remove the ElBurro, you only have to loosen the clamp on the seat post and the quick release from now on.

Note: If you have any questions about compatibility and assembly, please feel free to contact our customer service.