Skip to main content Skip to search Skip to main navigation
Menu

Average rating of 0 out of 5 stars

Create review

Litemove RXW-2900 e-bike headlight

Description

The Litemove RXW-2900 E-Bike Headlight gives you excellent visibility in road traffic. With a light output of up to 2900 lumens (when the high beam is activated) it brightly illuminates your route while making you clearly visible to other road users. In addition, the front light offers daytime running light, low beam and high beam modes. The built-in light sensor automatically switches between daytime running light and low beam while riding. The high beam is controlled via the high-beam button on the handlebar. The RXW-2900 headlight is mounted to the handlebar using the supplied Litemove lamp bracket.

Important note: The headlight is supplied with a cable with open ends. This cable must be prepared for fitting to specific e-bike systems. The required connection cable must be purchased separately. Suitable brackets and light cables can be found in our light cable category.

Features of the Litemove RXW-2900 E-Bike Headlight

  • Headlight with up to 2900 lumens output
  • Daytime running light, low beam & high beam
  • Road traffic certified (StVZO)
  • Protection class IP56 (protected against dust & water jets)
  • Litemove RXW-2900 headlight including cable & high-beam button
  • 1x lamp bracket for handlebar

How to set the desired watt mode

To set the desired watt mode, first switch the light on. Then press and hold the auto-sensor switch on the rear of the headlight for about five seconds until the status LED starts to flash. After releasing the button, briefly press the flashing switch to select the desired high-beam power mode. You can choose between the green mode (17 W), the yellow mode (22 W) and the red mode (28 W). Once you have selected the desired mode, wait until the flashing becomes steady after a few seconds; the setting is then complete.

Warning: The manufacturer recommends a minimum of 17 W at a nominal voltage of 12 V for optimal high-beam performance and warns that insufficient power supply can affect performance. Some motor systems, such as Bosch 5 Gen, for example, may only support the 17 W mode.

Properties
Colour: black
Compatibility: Litemove lamp holder for handlebar diameter 31.8 & 35 mm
Daytime running lights: 60 lux / 650 lumen
EAN: 4711017180994
High beam light output: 200 lux / 2900 lumen (28W) | 170 lux / 2425 lumen (22W) | 140 lux / 1970 lumen (17W)
Item: Litemove RXW-2900 e-bike headlight
Item weight: 155g (headlight incl. cable)
Light mounting position: Handlebar
Light output dim light: 140 lux / 1665 lumen
Luminous flux: The headlight can only be used with 12V (11V ~ 16V) direct current.
Maker's ref. no.: RXW-2900
Manufacturer: Litemove
Material: Aluminium
Measurements: Width: 83.0mm | Height: 50.8mm | Length: 52.0mm
Power source: E-Bike Battery
Safety features: Protection class IP56: Protected against dust and strong water jets.
Scope of delivery: 1x Litemove RXW-2900 headlight incl. cable & high beam switch, 1x lamp holder for handlebar
StVZO approval: German Road Traffic Licensing Regulations certified
Supply voltage : 12 V
Reviews 0

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


This is what our customers say: "Best online shop for e-bikes!"