€18.90
On order, delivery date unknown
Rohloff clamp incl. Torx screws as spare part for the Rohloff shift lever "light".
Assembly instructions
Tighten both clamp screws (M3x12 - Torx TX20) with a slight turning movement so that the gap on both sides of the clamp is approximately the same. To do this, turn the TX20 tool with two fingers on the shaft. Then tighten each clamp screw to max. 2Nm (1/2 turn). The twist grip must now be firmly fixed to the handlebar tube.
Caution
Over-tightening the screws can damage the clamping or the handlebar.
| Compatibility: | Rohloff shift knob "light |
|---|---|
| EAN: | 4250307403479 |
| Item: | Clamp and Torx screws for "light" shift knob |
| Maker's ref. no.: | 8193 |
| Manufacturer: | Rohloff |
| Material: | Aluminium (clamp) |
| Scope of delivery: | 1 clamp, 2 Torx screws |
Login