Rohloff shift cable counterholder straight (0°)

Rohloff shift cable counterholder 0°, straight for mounting on the chain stay with internal shift cable routing which requires a mounting point for the cable counterholder.

Mounting instructions
When routing via the chain stay, the "0° (straight) cable counter support must be mounted at a minimum distance of 240 mm from the hub axle.
240 mm from the hub axle to the chain stay. The fastening must be done in such a way
that the shift cables run as straight as possible out of the cable guides of the hub.

If the axle plate is mounted incorrectly or the cable counterholder is in the wrong position, the shift cable will run in a kink and be subject to greater wear.