Rohloff Bowden cable set incl. cable end caps

27.90€

Item number: 3635
Manufacturer Part Number: 8268
EAN: 4250307402243

Currently not available, we will be happy to request the item for you.

Rohloff Bowden cable set incl. cable end caps. Included are 2 inner cables with Ø 1.1 mm and 1.80 m length as well as 2 outer covers and 8 cable end caps.

Assembly instructions

The shift cables must be installed dry (without grease and oil). The plastic-stainless steel combination runs almost maintenance-free.
The spiral outer sheaths of the shift cables provide a defined detent feeling in the shift lever. The use of other shift cable sleeves (e.g. index cable sleeves with longitudinal wires or NOKON) reduces the detent feeling in the shift lever.

The shift cable tension is adjusted by turning the cable adjusters. Unscrewing the cable adjusters increases the shift cable tension. For easy shifting, adjust the shift cable tension so that a turning play of about 5 mm can be felt when turning the shifting handle. The marking on the shifting handle can be aligned with the numbers without changing the shifting tension by turning one of the tension adjusters in and the other out by the same amount.

Attention
Too much shift cable tension increases the friction in the shift cables and thus the shifting force.

Specifications

Manufacturer:	Rohloff
Item:	Bowden cable set incl. cable end caps
Scope of delivery:	2 shift cables 1.1 mm \| 2 sleeves 1.8m \| 8 cable end caps
Manufacturer:	Rohloff
Maker's ref. no.:	8268
Length:	1.80 m
EAN:	4250307402243