Prices incl. VAT plus shipping costs
- Item number: 4389
- Manufacturer Part Number: 245MFLCD28-59
- EAN: 245MFLCD28-59
currently not available
The Giant Ride control Charge e-bike LCD Display is suitable for all Giant SyncDrive models from model year 2017. With the Giant Ride Control Charge LCD display, you can see the EnergyPak capacity, support mode, cadence and speed.
5 support levels (Eco, Eco+, Normal, Sport, Sport+ ) allow you to change the motor support level and respond to different terrain. In addition, smartphones or other devices can be charged via a micro USB port.
Current software version:
The Giant Ride Control Charge is supplied with the latest software version. This software is updated by Giant at unspecified intervals. We only supply new displays, so you will always be sent the RideControl with the latest software version. The display software is compatible with the connected hardware, including older hardware.
Combination with Giant Ride Control One / Charge / EVO Pro:
The Giant Ride Control Charge can be used as an alternative to the multifunctional Giant Ride Control One control unit or the Giant Ride Control EVO Pro display
Caution. The Ride Control One is NOT compatible with the Ride Control Charge or Ride Control EVO. Ride Control Charge or Ride Control EVO are exclusively compatible with the Giant Ride Control Remote control unit, despite identical connection cables.
The plastic clamp for handlebar mounting is suitable for 31.8mm handlebar diameter without rubber reducer insert. With a reducing insert, only 22.2mm (= area of the handlebar grip) handlebar diameters are possible. A 25.4mm reducer and clamps for 35mm handlebars are not available from Giant.
The mounting is done via a plug connection inside the frame down tube, you can reach it after carefully pulling the rubber tube / cable guide out of the frame. To replace the display, carefully pull the cable out of the down tube of the frame, after a few centimetres you should be able to see a plug connection.
This connection is plugged in straight, so it is not twisted! Please pay close attention to the guide lug when reassembling.
Attention. Please make sure that the cable connection is not already accidentally disconnected in the frame down tube, otherwise you will have to "fish" the cable connection out of the cable grommet" or dismantle the upper battery holder in the frame!
|Scope of delivery:||1x Ride Control Evo Pro LCD Display with USB cable|
|Compatibility:||Dirt-E+, Explore E+ and Vall E+|