Ready-to-Ride delivery
15 years of experience
fast shipping

Bosch Kiox 500 Display Retrofit Kit

From 179.00€ *

Prices incl. VAT plus shipping costs

  • 9325-001

Display holder:

Cable outlet:

With the Kiox 500 retrofit kit , you can retrofit your Bosch Smart System eBike with the... more

With the Kiox 500 retrofit kit, you can retrofit your Bosch Smart System eBike with the practical display. The set contains all parts for a successful installation - the Bosch Kiox 500 display, the display bracket, a Bosch Smart System display cable and, if required, the matching Kiox 500 single arm bracket. To retrofit, attach all parts to your eBike and connect the Smart System Display to your Bosch LED Remote control unit on the handlebar. Now your new Kiox 500 display is ready for use and you are always well informed about your eBike.


  • comprehensive set for retrofitting the Bosch Kiox 500
  • Bosch Kiox 500 display
  • Bosch display interface/ mounts
  • Bosch Smart System display cable - 300mm
  • on request incl. 1-arm handlebar mount - 31.8/35mm


With the introduction of the Smart System 2022, Bosch has comprehensively revised its eBike system. Almost all components and parts have been adapted and optimised. The biggest technical change is that the central control of the eBike now takes place via the Bosch LED remote handlebar control unit. This means that you can now operate your Bosch eBike without a separate display. If you still don't want to do without the operating comfort and the extensive status information, the Kiox 500 retrofit set is available. The popular Bosch display can be retrofitted in just a few steps.


For the retrofit, you only need to attach the Kiox 500 to your eBike and switch between the eBike drive and the LED Remote with the display cables. To do this, the first step is to mount the Bosch Smart System Display bracket on your bracket, if necessary on the supplied 1-arm bracket. Depending on how you want to mount the Kiox 500, you will need a different display bracket. Mounting in front of the handlebar - you need the mount with cable exit to the rear. Mounting behind or above the handlebar - you need the mount with cable exit in front. Now you can attach e.g. the single arm holder from the Kiox 500 conversion kit. Now take the existing display cable from the control unit and plug it into the Kiox 500 mount. Use the 30 cm long display cable from the conversion kit to reconnect the display holder to the LED Remote. This completes the assembly and the Kiox 500 is ready for use. For optimal attachment to any eBike, the Bosch Display Cable for Smart System is available in different cable lengths; only the 300mm version is included in the set.


The high-resolution eBike display from Bosch shines with high-quality workmanship and comprehensive functions. Here you will find all relevant information about your eBike such as battery status, range, selected assistance, speed and much more. The Kiox 500 display is controlled via your LED remote control on the handlebar. This way, you always have your eBike firmly under control and are still well informed. A small safety plate also prevents the Kiox 500 from being easily removed from the mount. However, a charging function for smartphones is not provided.

Note: If you have any questions about the conversion or are unsure about compatibility, please feel free to contact our contact customer service.

Drive system: Bosch drive
Manufacturer: Bosch
Bosch System: Bosch Active Line from 2024 Smart System, Bosch Active Line Plus from 2024 Smart System, Bosch Cargo Line from 2022 Smart System, Bosch Performance Line CX from 2022 Smart System, Bosch Performance Line CX Race from 2023 Smart System, Bosch Performance Line from 2023 Smart System, Bosch Performance Line Speed from 2023 Smart System, Bosch Performance Line SX from 2024 Smart System
Scope of delivery: 1x Bosch Kiox 500 Smart System, 1x Bosch Kiox 500 display mount incl. anti-theft device, 1x Bosch Smart System display cable 300mm | according to choice: without bracket; 31.8mm or 35mm single-arm bracket incl. clamp, adapter shell, spacer and 4x mounting bolts
Colour: Anthracite
Compatibility: Only for Bosch Smart System drives from 2022 onwards
Cable length: 300 mm
Handlebar clamp: 31.8mm or 35mm
Bosch E-Bike System: Bosch Smart System
Read, write and discuss reviews... more
Customer rating for "Bosch Kiox 500 Display Retrofit Kit"
Write a review
Evaluations will be activated after verification.

The fields marked with * are required.

Rate us!