BROSE light cable front light

With the Brose front light cable , you can connect your eBike motor to a suitable headlight. The light cable is intended exclusively for connection to the front light . When plugging it into the motor, make sure that the connection is correct. The plug is shape-coded accordingly and only fits in one slot. With the Brose front light cable, you can easily retrofit a lighting system to your eBike or replace a defective cable. The light cable is available in lengths of 1095 mm and 1500 mm for optimum installation. To connect a rear light, you need the Brose rear light cable.

Features of the Brose front light cable

• Original Brose light cable
• for connecting the motor and front headlight
• 2-core with robust protective sheath
• unique, shape-coded plug
• available in two lengths

Important notes on the Brose front light cable

The original Brose motors do not have overload or overvoltage protection. Therefore, when connecting your lighting system to the Brose motor, make sure you use suitable lamps. The following maximum values apply to:

Headlights Brose aluminium (Alu) motors

Voltage: 6 V
max. current: 2.0 A
max. power: 12 W

Rear light Brose aluminium (Alu) motors

Voltage: 6 V
max. current: 0.1 A
max. power: 0.6 W

Headlight Brose magnesium (Mag) motors

Voltage: 12 V
max. current: 2.0 A
max. output: 24 W

Rear light Brose Magnesium (Mag) motors

Voltage: 12 V
max. current: 0.2 A
max. power: 2.4 W

If you are unsure about compatibility, please contact our customer service.